Soldier Acrylic Distemper
Water based Soldier Acrylic Distemper offers economic solution for interior walls, gives a matt finish to your home interiors.
Features & Benefits
- Economical Distemper
- Ease of application
- Eye soothing matt finish
Surface Preparation
- All plastered surfaces should be matured, cleaned, dry and free from all loose or poorly adhering material, dirt, grease, wax etc.
- Apply a coat of Soldier Oil Primer (Solvent thinnable ) or Soldier Universal Primer (Water Thinnable).
- Apply Acrylic Wall Putty/Soldier Cement Putty (wherever required) to level the dents. Sand the surface with emery paper no. 180 and wipe clean.
- Apply another coat of primer and allow it to dry. Sand the surface with emery paper no. 320 and wipe clean.
Thin 1 kg paint with 600-650 ml of clean water. Add water slowly to the paste while continuing to stir the mixture. Apply 2 to 3 coats with an interval of 4 -6 hrs by brush or roller. Dark shade may require additional coat.
Technical Data
Coverage*
On Smooth and non-absorbent surface.
150 - 170 sq.ft./Kg/coat
Drying Time
Surface Dry : 30 minutes
Recoating
@27° ± 2°C & RH 60 ± 5%
After 3 - 4 hours
*Actual coverage may vary depending on method & condition of application, surface roughness